Skip to main content

Pentaho+ documentation has moved!

The new product documentation portal is here. Check it out now at docs.hitachivantara.com. 

 
Version Data Integration and Analytics
Hitachi Vantara Lumada and Pentaho Documentation

Maintain logging

  1. Last updated
  2. Save as PDF

Parent article

Pentaho enables you to maintain your system logs with rotation and monitoring the execution status of transformations and jobs.

Parent Topic
Child Topics

Log rotation
This procedure assumes that you do not have or do not want to use an operating system-level log rotation service. If you are using such a service on your Pentaho Server, connect to the Pentaho Server and use that instead of implementing this solution.

The Pentaho Server uses the Apache log4j Java logging framework to store server feedback. The default settings in the log4j2.xml configuration file comes pre-configured for a rolling file appender. This appender will cause the log files to archive the previous day’s log file and roll over to a new file each day.

To configure a size-based strategy to roll over log files when they reach a specific size, perform the following steps to configure a SizeBasedTriggeringPolicy appender.

Procedure

  1. Stop all relevant servers.

  2. Edit the log4j2.xml settings file for the Pentaho Server. This XML file is located in: server/pentaho-server/tomcat/webapps/pentaho/WEB-INF/classes/

  3. Modify the PENTAHOFILE RollingFile appenders to match the log rotation conditions that you prefer. In this example, we change the TimeBasedTriggeringPolicy to a SizeBasedTriggeringPolicy. You may need to consult the log4j documentation to learn more about other configuration options.

    <RollingFile name="PENTAHOFILE" fileName="../logs/pentaho.log" filePattern="../logs/pentaho.log.%i">
            <PatternLayout>
                <!-- The default pattern: Date Priority [Category] Message\n -->
                <Pattern>%d %-5p [%c] %m%n</Pattern>
                <!-- The full pattern: Date MS Priority [Category] (Thread:NDC) Message\n
                <Pattern>%d %-5r %-5p [%c] (%t:%x) %m%n</Pattern>
                 -->
            </PatternLayout>
            <Policies>
                <SizeBasedTriggeringPolicy size="10 MB" />
            </Policies>
            <DefaultRolloverStrategy max="1" />
     </RollingFile>

  4. Save and close the file.

  5. Start all affected servers to test the configuration.

Results

You have an independent log rotation system in place for all modified servers.
Parent Topic

Execution status

You can view remotely executed and scheduled job and transformation details, including the date and time that they were run, and their status and results, through the PDI Status page. To view it, navigate to the /pentaho/kettle/status page on your Pentaho Server (change the host name and port to match your configuration):

http://localhost:8080/pentaho/kettle/status
You must be logged in to ensure you are redirected to the login page.

You can get to a similar page in the PDI client by using the Monitor function of a slave server. This page clears when the server is restarted, or at the interval specified by the object_timeout_minutes setting.

Parent Topic
Child Topics

On Carte
Any action done through the Carte server embedded in the Pentaho Server is controlled through the /pentaho/server/pentaho-server/pentaho-solutions/system/kettle/slave-server-config.xml file. Notice the Configuration details table at the bottom of the screen. This shows the three configurable settings for schedule and remote execution logging.
NoteTo make modifications to slave-server-config.xml, you must stop the Pentaho Server.
The three configurable options in the slave-server-config.xml file are explained in the following table:
PropertyValuesDescription
max_log_linesAny value of 0 (zero) or greater. 0 indicates that there is no limit.Truncates the execution log when it goes beyond this many lines.
max_log_timeout_minutesAny value of 0 (zero) or greater. 0 indicates that there is no timeout.Removes lines from each log entry if it is older than this many minutes.
object_timeout_minutesAny value of 0 (zero) or greater. 0 indicates that there is no timeout.Removes entries from the list if they are older than this many minutes.
The following code block is an example of the slave-server-config.xml file:
<slave_config>
  <max_log_lines>0</max_log_lines>
  <max_log_timeout_minutes>0</max_log_timeout_minutes>
  <object_timeout_minutes>0</object_timeout_minutes>
</slave_config>
Parent Topic

Best practices for logging
Kettle logging provides extensive flexibility that allows you to determine log locations, granularity, as well as what information is captured. Here are the best practices for setting up logging in your environment. For more information on logging, see Logging and performance monitoring.
  • Store logs in a centralized database. By default, log files are stored locally. The PDI client, Carte, and Pentaho Server logs are stored separately. To make log information easier to find, place logs in a central database. As an added bonus, centralized logging makes it easier to use PDI’s performance monitoring more effectively.
  • Obtain full insert accesses for tables. Logging can fail if you do not have the appropriate accesses. Having the appropriate accesses minimizes this risk. To learn more about table access, consult the documentation for your database.
  • Install JDBC Drivers Locally and on Each Server. This helps you avoid Driver not found errors. For a list of supported drivers, see JDBC drivers reference.
  • Use implied schemas when possible. Implied schemas result in fewer places to troubleshoot should logging fail. Of course, you can still specify a schema if needed.
  • Make templates for transformation and job files. Include logging configurations in the template so that they can be reused with ease.
  • Use Kettle global logging variables when possible. To avoid the work of adding logging variables to each transformation or job, consider using global logging variables instead. You can override logging variables by adding information to individual transformations or jobs as needed.
  • Use different logging tables for jobs and transformations. If you find logging table data is deleted unexpectedly, see Log table data is deleted
If you choose to use the kettle.properties file, observe the following best practices.
  • Backup your kettle.properties files. If you are making many changes to the kettle.properties file, consider backing up the file first. This will make it easier to restore should issues occur.
  • Maintain a master copy of the kettle.properties file. It is usually easiest to use the kettle.properties file for the PDI client, then to overwrite the Carte and Pentaho Server copies if changes are made. Make sure that values that might change, such as directory paths, are maintained however.
  • Test thoroughly. Test your settings by saving your kettle.properties file locally, then restarting the PDI client. Make sure the kettle.properties file loads properly. Execute a transformation or job that uses the settings. Try executing the transformation locally and remotely on the Pentaho Server to ensure that log variables reference the same places.
Parent Topic